Type T Vent Valves

Pressure-Vacuum Relief Vent Valve

Documents

Flow Charts:

Category:
Specifications
SIZES: 2, 3, 4, 6, 8 and 10 inch
BODY: Cast Iron
TRIM: Aluminum or Stainless Steel
MEMBRANE: Teflon
MOUNTING CONNECTION:
  2 and 3 inch N.P.T.
  4, 6, 8 and 10 inch 125 lb ANSI FF
SETTINGS:   Min. Max.
  Aluminum Trim 1/2 oz. 1 P.S.I.
  Stainless Steel Trim 1 1/2 oz. 1 P.S.I.
Dimensions in Inches
Dimensions in Inches
Size A B Shipping Wt. Lbs.
2 9 3/4 7 23
3 13 1/2 8 52
4 16 7/8 11 3/4 80
6 28 1/2 15 1/8 215
8 36 3/4 16 3/4 310
10 41 7/8 16 3/4 400

OCECO type "T" vent valves are designed to relieve both positive and negative pressures which occur during daily tank operation.  As with all other OCECO breather vents, the OCECO "T" vent permits only the breathing volume required to maintain safe working pressures.

These valves have been used in severe service applications, in a wide range of temperatures and climatic conditions, for over thirty-five years.

The standard OCECO type "T" vent consists of a cast iron body, covers and yokes with either aluminum or stainless steel trim.  The covers are arched for additional strength and centrally supported by the cast yokes.  Both valve pallets are stem guided and may be set to relieve as high as one P.S.I.

Special materials are available for highly corrosive applications on request.